Skip to main content

Full text of "PlayStation 2 Repair Manual"

See other formats


Installing PlayStation 2 Power Board 



/ffXft 



Installing PlayStation 2 Power 

Board 

Written By: jwyoung 

y* TOOLS: 

• Metal Spudger (1) 
Phillips #1 Screwdriver (1) 

• Phillips 00 Screwdriver (1) 



SUMMARY 

Remove and replace your PlayStation 2's power board. 



©iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 8 



Installing PlayStation 2 Power Board 



Step 1 — Top Cover 






• Flip the PlayStation 2 over so it lays with the bottom of the device facing upwards. 

• Use the flat edge of a metal spudger to pry the eight flat screw covers out. 

• Remove the following eight screws securing the top cover to the bottom case: 
• Four 55.4 mm Philips screws 

Four 18.0 mm Phillips screws 



* 



Step 2 



Ww 




;k', '■■ : ;j 

■ ° ' 








-^m^gg^m^ m(i 



• Peel the warranty sticker (located 
next to the main power switch) 
straight away from the case. 

• To avoid activating the 
VOID that may come up, 
heat it carefully to remove and 
replace it clean 



Gr 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 2 of 8 



Installing PlayStation 2 Power Board 



Step 3 





• Flip the PlayStation 2 back to its original upside position. 



* 



• Lift the top cover off the bottom case. 

• To facilitate the removal, it is recommended to pry open the half closer to the power 
switch first while rocking the top cover towards the front of the bottom case. 

• Carefully remove the power cord that attaches the top and bottom halves by disconnecting 
the power cord assembly from the bottom case. 



Gr 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 3 of 8 



Installing PlayStation 2 Power Board 



Step 4 — Power Board 




♦ Remove the two 6.4 mm black Phillips screws securing the optical disc drive to the bottom 
case. 

• Lift and remove the optical disc drive straight up out of the bottom case. 
Step 5 




♦ Remove the two 14.6 mm gold-headed Phillips securing the controller ports to the bottom 
case. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 4 of 8 



Installing PlayStation 2 Power Board 



Step 6 




• Gently lift the controller port board out of its recess within the bottom case. 

• Do not completely remove the controller port board. It is still attached via a ribbon 
cable. 



A 



• Pull the controller port ribbon cable straight away from its socket on the controller port 
board. 

• Remove the controller port board out of the bottom case. 



Step 7 




• Remove the two 14.6 mm gold 
Phillips screws securing the fan to 
the bottom case. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 5 of 8 



Installing PlayStation 2 Power Board 



Step 8 







^iimS 






^^ 


J 





A 



• If there is a device 
occupying the expansion 
bay, make sure to remove the 
device. The expansion base should 
be empty. 

• Pry and remove the expansion bay 
cover away from its posts on the 
bottom case. 



Step 9 




• Lift the motherboard assembly from 
its front edge and remove it from 
the lower case. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 6 of 8 



Installing PlayStation 2 Power Board 



Step 10 




• Now that all of that bulky 
plastic is out of the way, we 
can get to the fun stuff - 
electronics! 

♦ Remove the four 7.6 mm gold-head 
Phillips securing the power supply 
to the motherboard assembly. 



Step 11 




• Lift the expansion bay cage up off 
the motherboard assembly. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 7 of 8 



Installing PlayStation 2 Power Board 



Step 12 




• Do not remove the power board yet. It is still attached to the motherboard assembly 
via the power board connector (highlighted in the first picture), which is located next 
to the main power switch. 

• Carefully lift the power board. You should now see the power board connector 
attached to the power board. 

• Pull the power board connector straight to lift it out of its socket on the power board. 






To reassemble your device, follow these instructions in reverse order. 



This document was last generated on 2012-10-31 07:54:24 PM. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 8 of 8